TURFSAustralia

Artificial Turf for Pool Surrounds: Soft, Green, No Mud

Artificial turf for pool surrounds: soft on wet feet, no mud or clippings in the water, and grippy when wet. See what to spec and price your exact area.

Reviewed by the TURFS Australia team · updated 16 August 2026

Why turf around a pool beats pavers on their own

A fully paved pool apron does the structural job, but living with it is another story. Pavers get hot, they're hard on knees when kids inevitably go down, and the glare off a big pale surface on a summer arvo is unpleasant. Real lawn near the pool trades those problems for new ones: mud tracked into the water after rain, clippings blowing in every mow, and grass that browns off exactly where everyone walks.

A band of artificial turf between the coping and the fence fixes most of that in one go. No mud, ever. No clippings in the skimmer box. A soft landing for wet feet, and it stays green through winter and water restrictions, when real lawn looks its worst.

Pavers only Real lawn nearby Turf + paver coping
Mud in the pool No Yes, after rain No
Clippings in the pool No Every mow No
Soft underfoot No Yes Yes
Green in winter n/a Usually patchy Yes
Grip when wet Varies by paver Slippery when muddy Good

What to spec for the resort look

For pool surrounds, a 30-40mm pile is the sweet spot. Shorter budget turf (15-25mm) reads sparse next to water and flattens faster in high-traffic strips. A 30mm like Turf Classic 30 gives you the tidy, manicured look; a 40mm like Turf Pro 40 is denser and lusher, which is what most people mean by "resort style". The pile height guide covers the trade-offs.

On price, Australian market rates for mid-range 25-35mm turf sit around $30-45/m² supply only, and premium 35-45mm around $40-60/m², both inc. GST. Professional installation typically adds $30-70/m² on top. Our own range is on each product page with an instant calculator, so you can price your exact size in a few seconds.

One worry we can put to bed: chlorinated and saltwater splash won't hurt quality turf. The fibres are polyethylene, the same family of plastic used in water tanks. An occasional hose rinse of the splash zone stops salt or chemical residue building up in the infill, and that's the whole job.

Get the drainage right at the coping

Turf drains through perforations in its backing, down into a compacted crusher dust base. Around a pool, two details matter. First, set your base falls away from the pool, same as with paving, so storm water doesn't carry fines toward the coping. Second, finish the turf flush with or a few millimetres below the coping and fix it well there with pins or adhesive. A loose edge right where wet feet pivot is the first thing to lift.

The honest bit: heat

Artificial turf gets hotter than real grass in direct summer sun. On a 35°C-plus scorcher it can be uncomfortable on bare feet, and no infill or "cool" yarn fully escapes that physics. The good news: you're standing next to several thousand litres of water, and a 30-second hose-down drops the surface temperature fast. A border of light-coloured pavers as the main walking line helps too, as does a shade sail over the spot where people actually lie about.

Grip when wet

This one goes in turf's favour. Wet turf with sand infill stays grippy underfoot in a way smooth pavers and tiles don't, which matters when kids run the same wet loop all afternoon. It's not a substitute for the usual pool rules, but it takes the sting out of the surface itself.

Curves, cutting and measuring up

Almost no pool is a rectangle, and turf comes on 3.71m wide rolls. The method: treat each turf area as its bounding box, measure the longest length and widest width, and order that. Curves get cut on site with a sharp knife, or tell us the shape and we'll custom-cut before dispatch. Offcuts rarely go to waste; they patch the odd strip behind the filter box. The measuring guide walks through it with diagrams, and upkeep afterwards is a rinse and an occasional brush, covered in the maintenance guide.

Frequently asked questions

Does chlorine or salt water damage artificial turf?

No. Quality turf fibres are polyethylene, which is unaffected by normal pool chlorine levels and saltwater splash. The only upkeep is an occasional hose rinse of the splash zone so residue doesn't accumulate in the sand infill.

Is artificial turf slippery around a pool?

Turf with sand infill is one of the grippier wet surfaces you can put around a pool, noticeably better than smooth pavers or tiles. The fibres give bare feet something to bite into even when soaked. Normal pool supervision still applies, but the surface itself works in your favour.

How hot does turf get next to a pool in summer?

Hotter than real grass, and above about 35°C it can be uncomfortable on bare feet in full sun. A quick hose-down cools it within seconds, and light-coloured paver walkways or partial shade fix the main traffic lines. Most owners find this a minor trade-off against mud-free, always-green surrounds.

Can artificial turf be cut to fit a curved pool?

Yes, easily. Order enough turf to cover the bounding box of each area (longest length by widest width), then cut the curve along the coping on site with a utility knife, or have it supplied pre-cut to your template. Rolls are commonly 3.71m wide, so most surrounds need only one or two joins.

The range

All three finishes work for this — pick by pile height and budget, then price your exact size.